Stormsure adhesive and patches can be used to repair a wide variety of outdoor gear.
Stormsure’s repair kits are all-in-one packs containing carefully selected contents that enable you to easily make reliable and long-lasting repairs to the respective type of item or piece of equipment.
Stormsures Tent & Groundsheet repair kit has a good mix of Stormsure products with a tube of adhesive and a set of Tuff Tape patches. The videos show exactly how you can use this stuff and it weighs so little it's a no-brainer to add it to your safety kit in your backpacking set up.
Stormsure Adhesive does not stick to Silicone infused fabrics such as those used in lightweight backpacking tents.
- Reviewed by BasecampGear
For repairs on inflatable tents, particularly those with inflatable pillars, struts and air-beams. Also for material tents, awnings and groundsheets
For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch.
For damage in awkward or hard to reach areas, clean the damaged are (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 10-12 hours.
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer.